Eliminate the risk of climbing bins to check feed levels, improve worker safety and decrease labor cost with Feed-Link™. On-site feed inventory can be monitored and managed at the site or remotely. Cost-effective and easily adapted to new or existing facilities, Feed-Link™ provides accurate real-time feed inventory and consumption data.
|Input Power||110/220 volt - 50/60 hz|
|Display Resolution||0 lbs. - 10 Kg. - 1%|
|Display Temperature Range||-5 to 150⁰F / -20 to 65⁰C|
|Water Pulse Meter||1 gal. / 3.8 liters per pulse|
|Max Weight - Standard Load Cell||5,000 lbs. / 2,250 kg.|
|Max Weight - High Capacity Load Cell||10,000 lbs. / 4,500 kg.|
The rugged load cell assemblies are specifically designed for the harsh environment of a swine facility and adapt easily to most feed bins. A standard unit for up to 5,000 lbs. (2,250 kg.) per bin leg or a high capacity model rated at up to 10,000 lbs. (4,500kg.) per bin leg are available. The compact design of the load cell assemblies only increases the overall height of the feed bin by approximately three inches (8 cm).
Feed-Link’s™ unique field calibration system, in combination with the placement of a load cell under every leg, allows for maximum feed monitoring accuracy.
The Feed-Link™ display unit may be mounted either on the bin or inside the house (up to 100 feet away.) It serves as the interface to perform a simple calibration procedure after the system has been installed. Set the digital display to show pounds, kilograms or percentage of full.
To see relevant specifications for your business, provide the information to the right: