Flow Hammer

ap_fammer_hero_1280x485.jpg

Low Frequency, High Impact

Prevent out-of-feed events with the patent pending Flow HAMMER*, a reliable and affordable feed bridging solution that easily adapts to most existing feed bins. Its low frequency/high impact design promotes reliable first-in/first-out feed flow without damaging the bin.

*U.S. Patent No. 9,493,300

Key Features

Minimize Feed Bridging Events
Full or Empty Bin Installation
Timed or Sensor Controlled
No Vibration 500 Lbs/Second Impact

Features

Callout Image

No Vibration

Compare Flow HAMMER'S low frequency, high impact design to high frequency vibration devices which can loosen hardware, cause metal fatigue and result in structural failure. Flow HAMMER promotes feed flow without damaging your bin or voiding its warranty.

Callout Image

Flexible Installation

The Flow HAMMER can be installed on a full or empty bulk feed tank. The simple and concise control unit can be remotely- or tank-mounted with an optional leg bracket.

Callout Image

Multiple Mode Control Unit

Flow HAMMER'S control unit has timed- and sensor-control modes. The timed mode uses an “on” time and a “cycle” time to control as the feed system is running. The sensor mode activates the Flow HAMMER when a feed flow issue is detected and deactivates once corrected.