Home | About AP | Sales & Support
Boots and Unloaders--|--Timers, Sensors and Switches--|--Feed Storage Systems
-->Home >Swine/Dairy Systems > Feed Delivery Systems > Flex-Flo™ Systems
AP Flex-Flo™ Systems
Flex-Flo™ Specifications
Nothing beats AP's Flex-Flo™ feed delivery system in flexibility and adaptability. Using PVC tubing as the carrier of feed not only provides flexibility in facility design, but reduces dust, provides protection against insect and rodent contamination, and reduces stressful operation noise. 		 

PVC Tubing
Special Blend
AP's polyvinyl chloride (PVC) tubing is extruded and formed in our own facility, to exacting standards and under our own quality control. Blended PVC allows us to formulate the optimum compound for UV stabilization, strength and wear resistance.

Quality Auger
Quality Auger
AP augers are coiled in-house from high tensile steel ... and AP uses wire which is flattened prior to hardening, providing for a more consistent, high quality product.
     
  AP Flex-Flo Systems
Wear Resistant Elbows
For moving feed up in the air and around corners, Flex-Flo™ tubing is available in specially formed elbows with increased wall thickness on the elbow for strength and wear resistance.
Thicker Inner Wall		  

Flex-Flo™ Models
Both tubing and augers are available in a variety of models. Whether its ground feed, crumble feed, mash, high moistures corn, shelled corn or pellets, AP has the transport system to fit your needs. Flex-Flo Models

For corn up to 27% moisture and other hard to flow materials, the Flex-Flo™ High Roughage system utilizes a combination of a Model 300 (75mm) auger in a Model 350 (90mm) tube. For pelleted feeds, a specially designed auger is available for Model 300 Flex-Flo™, which increases the tolerance between the tube wall and auger. This increased tolerance prevents auger plugging and damage to expensive pelleted feeds.

  
 

Efficient Power
The Flex-Flo™ auger is driven by a 1/3 to 1-1/2 horsepower, totally enclosed, fan cooled motor at a standard 358 RPM (other speeds are available for special applications).
Flex-Flo Drive Units
Whether direct or belt driven, the drive system includes an easily accessible maintenance port ... a safety back-up switch which automatically stops and restarts the motor if for any reason feed backs up in the line (a readily visible warning light comes on to notify you that this is occurring) ... and an automatic thermal shutoff switch which allows you to restart the system when the motor has cooled off.) All electrical connections are made in a plastic, water resistant control box.

   90 Degree Access Extension Hoppers
90 Degree Access Extension Hoppers
AP's Flex-Flo™ PVC tubing is capable of spanning distances of up to 150' with most models and 250' with the 220 Model (See Specs). For applications requiring distances greater than the standard length of any given system, extension hoppers are available that can expand the delivery range to practically any distance and can provide access at 90 degrees from the main line.		   Belt Drive Unit
Belt Drive Unit
As with the direct drive unit, AP's belt drive unit features an easy to access maintenance port and automatic overheat shutoff in the event of feed backup in the line.
 
Boots and Unloaders | Timers, Sensors and Controls | Feed Storage Systems