Kooler systems utilize the natural cooling effect of evaporation to
combat seasonal dips in production caused by heat stress. Efficient
cellular water media can achieve temperature reductions up to 20 degrees
depending on temperature and humidity conditions. AP offers two different
styles of Komfort Koolers. The Closed Top System has been the industry's
favorite for many years. Made of ultraviolet stabilized PVC, this
system offers great durability and longevity. In addition, a new and
rapidly growing Open Top System is available. This design offers easy
access to manage and maintain the evaporative cooling system and utilizes
a combination of PVC and high quality stainless steel for years of
dependable operation. Komfort
Kooler systems can be adapted to most new and existing production
facilities. Automated Production Systems can assist you in correct
sizing and placement and give you a realistic expectation of the effectiveness
of evaporative cooling in your climate.
Closed Top System
The Closed Top system is extruded from ultraviolet stabilized PVC
for durability and ease of installation. The hinge-open cover and
thumbscrews allows accessibility to the spray bar and holds pads
firmly in place. The spray bar bracket and water defector insure
pads are uniformly wet.
Open Top System
Made of high quality stainless steel, this system will give years
of dependable operation under the harshest conditions. The Open
Top design allows you to see the water jets and easily check water
pressure. It also offers access to the spray bar for cleaning. Pre-punched
and heavy duty stainless steel components help simplify installation.
roto-molded holding tank offers increased water storage capacity.
The submersible pump keeps water levels consistent for efficient
water delivery. Unevaporated water flows back to the holding tank
to be re-circulated and a float level and port automatically add
water as required.
Both systems accommodate easy removal of pads for cleaning.
Wide selection of cooling pads to choose from.
Trough support brackets are optional for suspending system
on sidewall, and Center Feed Kits for you longer cooling systems
pre-formed square trough serves as a 3 gallon per lineal foot (44.8
liters per meter) water reservoir. Constructed of corrosion proof,
ultraviolet stabilized PVC components, the trough allows unevaporated
water to be recirculated back to the holding tank. A perforated tray
snaps to the trough to hold pads firmly in place. Injection molded
end caps and couplers speed installation.