 |
AP
Specialty Fans
Whether winter or summer, your livestock need to have maximum comfort
levels to achieve optimum results. The AP line of specialty fans
can aid in the bettering of otherwise marginal environments.
|
|
Optional
Fogging Kit
For additional Cooling, an optional fogging kit delivers a fine
mist of water directly into the air stream of the fan. Fogging kits
can lower the air temperature as much as twenty degrees by using
the natural cooling effect of evaporation. Fogging kits are available
for all sizes of circulation fans.
Fiberglass
Props
AP fan props are carefully balanced to provide smooth and efficient
operation. Constructed of a strong and durable fiberglass blend,
these props will outlast most other blades of plastic, steel, or
cast aluminum.
Fan
Guards
AP's fan guard is made of heavy steel with a baked on powder coat
finish.
Fan
Shutters
Take a look at AP's selection
of ventilation shutters.
|
| |
|
|
| |
 |
|
Mini-Brute™
Fans
Mini-Brute™
Specifications
Mini-Brute™ 10" ventilation fans are smaller, more
energy efficient fans designed for low air requirements, such
as in small farrowing rooms and hot nurseries. Mini-Brute™
fans move lower volumes of air for less heat loss, use low
h.p motors and are reasonably priced which makes them very
cost effective. They deliver more precise amounts of air under
windy conditions than their larger counterparts.
|
| |
|
|
 |
|
Pump
Out Pit & Duct Fans
POP and Duct Fans
Specifications
There's a simple, sensible and inexpensive means to ventilating
pits. Virtually all liquid manure storage pits are equipped
with pump-out ports. For pump-outs that do not extend into the
manure, pump-out pit fans can be adapted to the ports. The pit
fans are housed in foot-long, 10" diameter PVC pipe and
can be easily adapted to existing pump-out ports. PVC pipe extensions
and 45 degree elbows are available as accessory items. |
| |
|
|
 |
|
GP2433HD
Fans
GP2433HD Specifications
This fan is the old standby that has been built since 1976 and
was the first fiberglass ventilation fan in the swine industry.
We have retained this extremely popular model in our lineup
with one large change. We have replaced the old motor with the
Performer Series 24" motor. This, of course , greatly increased
both the performance and efficiency and gives you a motor that
holds up to the rigors of pit ventilation. It is backed by a
3-year warranty. |
| |
|
|
 |
|
24"
Basket Fans
The AP 24" basket fan is designed for year round use. This
unit is often run slowly in the winter time to reduce heat stratification
and "dead spots". In the summer time, it serves as
a high velocity cooling fan. With a vinyl coated guard, high
efficiency motor and nearly 8,000 cfm of circulation, this is
one of the best turbulence fan values on the market today. |
| |
|
|
 |
|
36"
Circulation Fans
Circulation Fan Specifications
Used primarily for cooling, this fan produces 11,300 cfm at
0 SP. The orifice ring increases the throw because the air
stream doesn't spread as quickly as it would with an open
wire basket. Flexibility in mounting allows for the direction
of air when needed. AP's 36" basket fan is highly effective
in reducing heat stress, increasing the rate of gain and feed
conversion.
|
| |
|
|
 |
|
Fiberglass
Panel Fans
Panel Fan Specifications
Panel fans are available in 14", 18", 24" or
36" sizes with high efficiency motors for greater electrical
economy. A tran-torque bushing secures the propeller to the
motor for greater gripping power. The fiberglass housing and
propeller are combined with an aluminum motor mount for a lifetime
of performance. These fans are available with guards on the
front, rear, or both. |
|
|
|