Promotes feed flow without damaging bin
Flow Hammer
Promotes feed flow without damaging bin
Highlights
- Minimize feed bridging events.
- Full or empty bin installation.
- Timed or sensor controlled.
- No vibration.
Low Frequency. High Impact.
Improve feed flow without damaging bin
Prevent out-of-feed events with the patented FLOW HAMMER*, a reliable and affordable feed bridging solution that easily adapts to most existing feed bins. Its low frequency/high impact design promotes reliable first-in/first-out feed flow without damaging the bin.
Compare FLOW HAMMER’S low frequency, high impact design to high frequency vibration devices which can loosen hardware, cause metal fatigue and result in structural failure. FLOW HAMMER promotes feed flow without damaging your bin or voiding its warranty.
*U.S. Patent No. 9,493,300
Built to Perform
Flexible Installation
The FLOW HAMMER can be installed on a full or empty bulk feed tank. The simple and concise control unit can be remotely- or tank-mounted with an optional leg bracket.
MULTIPLE MODE CONTROL UNIT
FLOW HAMMER’S control unit has timed- and sensor-control modes. The timed mode uses an “on” time and a “cycle” time to control as the feed system is running. The sensor mode activates the FLOW HAMMER when a feed flow issue is detected and deactivates once corrected.
